Geen producten (0)
Geen producten (0)

Sound Devices SCORPIO

€ 9.500,00 (exclusief btw 21%)
Specificaties
Productcode sd.scorpio
Omschrijving

De Sound Devices SCORPIO is een mixer / recorder met 16 mic/line preamplifiers, 32 kanalen Dante in en uit, 36 track's, AES in en uitgang, 12 analoge outputs.
Elke analoge input heeft analoge limiters, high pass filters, delay, 3-band EQ en phantom power.
De recorder neemt op op de 256gb SSD en 2x SD kaart. 

Specificaties van de Sound Devices SCORPIO

  • Freq. Response
    10 Hz to 80 kHz ± 0.5 dB (192 kHz sample rate, re 1 kHz)
  • THD + Noise
    0.005% max (1 kHz, 22 Hz–22 kHz BW, trim @20, fader @ 0, -10 dBu in)
  • Equivalent Input Noise
    -131 dBV (-129 dBu) max - (A-weighting, 76 dB gain, 150 ohm source impedance)
  • Processing Engine
    Highly extensible, full FPGA-based audio processing, 3 FPGAs • Six-way ARM multiprocessor system • 64-bit audio processing precision
  • Audio Over Ethernet
    Dante, 32 channels in, 32 channels out • AES67 compatible • 1 Gb/s Ethernet, 2 ports, transformer-balanced
  • Inputs 
    Mic/Line inputs: 16 total, all fully featured, 6 on full-size XLR, 2 on TA3, 8 on TA5 • Mic-level inputs: (XLR, TA3, TA5): Class-A, discrete differential long-tail pair, 4k ohm input impedance • Line-level inputs: (XLR, TA3, TA5): active-balanced, 4k ohm input impedance • AES3 or AES42 available on XLR inputs 1 and 6 • AES42: +10 V, 250 mA available, type-1, auto-ASRC • Rtn A, B, C (3.5 mm/10-pin): unbalanced 2-channel, 4k ohm input impedance • Com Rtn 1,2 (TA3, 3.5mm) balanced, 1-channel, 8k ohm input impedance • External Slate Mic (TA5): balanced, 8k ohm input impedance, menu-selectable 12 V phantom
  • Maximum Input Level
    Mic: +8 dBu (2.0 Vrms) • Line: +28 dBu (19.5 Vrms) • Rtn A, B, C: +18 dBu (6.2 Vrms) • Com Rtn 1, 2: +24 dBu (12.3 Vrms) • External Slate Mic: +12 dBu (3.2 Vrms)
  • High-Pass Filters
    • Adjustable 40 Hz to 320 Hz, 18 dB/oct. 1st stage analog
    (before preamp), 2nd stage digital
  • Limiters
    Limiters available at all channels, buses, headphones, for all sample rates • Analog first stage, all subsequent stages digital • Attack time: 1 ms • Release time: adjustable, 50 ms to 1000 ms • Threshold: adjustable, -2 dBFS to -12 dBFS • Selectable knee: hard or soft • Selectable ratio: inf:1, 20:1 Delay • Channel Adjustable 0-50 ms • Output Adjustable 0-500 ms
  • Maximum Gain
    Trim stage (mic input): 76 dB • Trim stage (line input): 36 dB • Fader stage: 16 dB • Bus stage: 16 dB • Headphone stage: 20 dB • Mic-to-Line: 108 dB • Mic-to-Headphone: 112 dB
  • Outputs
    XLR (L, R) active-balanced, 250/3.2k/120 ohms (mic/-10/line) • Hirose 10-pin (L, R) active-balanced, 250/3.2k/120 ohms (mic/-10/line) • TA3 (X1-X6) active-balanced, 250/3.2k/120 ohms (mic/-10/line) • 3.5mm (X7, X8): unbalanced, stereo, 1.8k ohms
  • Headphone Outputs
    • ¼”, 3.5 mm • TA5 (along with mic input pins) for single connection to headset + mic • High output, 4 ohm output impedance, 400 mW + 400 mW at each connector, all individually driven • Compatible with headphones of any impedance
  • Maximum Output Level
    • Line: +20 dBu (7.8 Vrms) • “-10”: +6 dBu (1.5 Vrms) • Mic: -20 dBu (0.078 Vrms) • X7/X8 Out: +6 dBu (1.5 Vrms) • Headphone outputs (¼”, TA-5, X9/X10): +14 dBu (4.0 Vrms)
    A/D converters • 32-bit, 120 dB, A-weighted dynamic range typical • Sampling rates 44.1 kHz, 47.952 kHz, 48 kHz, 48.048 kHz, 88.2 kHz,
    96 kHz, 192 kHz
  • Digital Outputs
    AES3 transformer-balanced, in pairs; 1-2 (XLR-L), 3-4 (XLR-R), 5-8 (Hirose 10-pin A) • 110 ohm, 2 V p-p, AES and S/PDIF compatible
  • Recording
  • Internal 256 GB SSD • Two removable SD Cards • Simultaneous recording to internal SSD and the two SD cards • exFAT formatting • 36 tracks (32 iso channels, 4 buses) • Broadcast WAV monophonic and polyphonic file format • 64-bit WAV (RF64) monophonic and polyphonic; support for files > 4 GB
    USB • USB-C (USB 3.1 type 1) for file transfer of internal SSD, both SD Cards • USB-A host for keyboard, external controller, external USB hubs
    supported for connecting multiple devices
  • Wireless
    Built-in Bluetooth v5.0 BLE (not supported with rev 1.0 release of SD-Remote)
  • Timecode and Sync
    Modes Supported: Off, Rec Run, Free Run, 24h Run, External, including External Auto-Record and Continuous modes. • Frame Rates: 23.98, 24, 25, 29.97 DF, 29.97 ND, 30 DF, 30 ND • Sample/Timecode Accuracy: 0.1 ppm (0.25 frames per 24 hours) • Timecode Input: 20k ohm impedance, 0.3 V - 3.0 V p-p (–17 dBu - +3 dBu) • Timecode Output: 75 ohm impedance, 5 V p-p (+12 dBu) • Word Clock Input: 10k/75 ohm selectable impedance, 1-5 V p-p input sensitivity • Word Clock Output: 75 ohm impedance, 5 V p-p output, at SR
  • Remote Control
    USB MIDI Control - 3rd party fader controllers • SD-Remote Android app • USB Keyboard • External Timecode Record Trigger
  • LCD
    • 320x240, Transflective, excellent sunlight visibility • Larger touchscreen display available via USB-connected SD-Remote app
  • Power
    External: dual 10-18 V inputs on locking TA4 connectors, pin-4 = (+), pin-1 = (-) • Dual rear-mount Sony-style L-mount batteries with chargers • Idle Current Draw: 875 mA @ 12 V (10.5 W) • Intelligent power-down of unused mic preamps and other internal circuits
  • Environmental
    Operating: -20° C to 60° C, 0 to 90% relative humidity (non-condensing) • Storage: -40° C to 85° C
  • Dimensions
    (H x W x D) • 5.1 cm x 32 cm x 20.5 cm ( 2 in x 12.6 in x 8.1 in)
  • Weight
    5.8 lbs (2.63 kg) unpackaged, without batteries

Ook interessant

€ 799,00
€ 239,00 € 229,00

De Set Gear Shop (onderdeel van De Herrieboerderij) maakt gebruik van cookies om onze website te verbeteren, om het verkeer op de website te analyseren, om de website naar behoren te laten werken en voor de koppeling met social media. Door op Ja te klikken, geef je toestemming voor het plaatsen van alle cookies zoals omschreven in onze privacy- en cookieverklaring.